Specifications

1.CE passed firing system
2.48 cues
3.Transmitter tange:500M
4.Programmable
5.Salvo and sequential fire

 

The product is special for stage fireworks, cake fireworks and other fireworks display.

 

Please notice that the whole set firing system is including one 24 waterproof transmitter ,2 pcs 24 channels receivers, one black plastic package case and one charger.

 

Parameters of transmitter

1. Powered by 12V internal rechargeable lithium battery, less weight and longer life.

2. with battery low indicator. Charging on AC for 8 hours.

3. with 24 memory indicator . The LED will turns RED when you press the buttons beside.

4. with antenna, more stable.

5. The remote distance is 500M.

6. with 24 buttons and 24 LED. When the cue is fired, the LED will turns RED.

7. with “rapid” button, it is divided into parts, “1-12” and “13-24”

8. Waterproof case

9. It could divide into 10 districts (control 10 pcs 24 channels receivers at max). Please notice the “district” button on the top right corner. When you adjust it to “1”, it will control the first 24 channels of first receiver (district). When you adjust it to “2”, it will run the second receiver (district).

 

Parameters of receiver

1. Powered by 12V internal rechargeable lithium battery, less weight and longer life.vvv

2. Each receiver has 2 channels , and there are 6 pcs receivers(6*4=24 channels) for one districts. There are two districts for the picture. You could add more if you want.

3. with “TEST” function. The LED will turns Green when the products are connecting well.

4. Each channel could fire one talon(consumer) igniters and 5 e-matches in series.

5. Programmable and interchangeable. You could use change the channels as you want. And if one receiver has some problem, you could use others instead.

6. It could divide into99 districts (control 60 pcs 4 channels receivers at max). Please notice the “district” button on the top right corner. When you adjust it to “1”, it will control the first 24 channels of receivers. When you adjust it to “2”, it will run the second 24 channels. You could use the transmitter to control the other districts by the same manner.

7. Rapid fire. Please adjust the “district” button to the one that you want to do the sequential fire. And then move the “1-12” and “13-24” buttons. Pressing  “rapid” button , all the channels will do the sequential fire with 0.4 Seconds.  If you need different sequential time, please tell us. We can set it in the factory.

  

Instruction of the charger

1. You’d better cut off the power of machine when charging on AC.

2. There are two LED on the charge( red LED and green LED), both will light when charging.

3. The green LED will burn out when the electricity is full . Only the red one is light.

4. the charging time is about 8 hours. And the firing system will keep working for 5-10 hours .

 

Attention

1.Please connect the products in series.

2.Please do not shake incept box violently, when no need use it.

3.Notice to prevent defile incept box when it's close to fireworks.

4.Please take the cell out when no use products for prevent defile incept box.

5.Please don't place the product in the damp, sour, alkali and pollution environment.

 

Video Link:  http://www.youtube.com/watch?v=G6R4Rxn2A6c