F21-10s crane remote control used for bridge crane and overhead crane,easy to operate to keep workers safety.

products Application:

Double hook/single speed hosit crane,single hook/double speed hoist crane.

And used for the industrial remote control which are under 11 connection

Breif Introduction

 Transmitter    size:239*65* 65mm          weight:255g

  Receiver        size:200*165*107mm        weight:1400g

Specification: 

control distance:                                 up to 100m

unique code :                                     over 4.3billon unique ID codes .

temperature :                                     -35°C___+80°C

Enclosure protection class :                 IP65

Transmitter power:                             DC3v

Receiver powder :                              AC 380v/ 36v/220V or DC12V/24V

output capacity:                                 full sealed relay output with 5 amperes  

Standard configuration:                

                          One transmitter ;

                          One receiver;

                          One 1m cable connect with receiver

                          One operation and maintain manual .

Products Features: 

* 10 Single speed push button 

* control points are upto 13

*With the battery voltage alarm device to cut off the circuit when voltage is insufficient.

*with the Rotate key switch to guarantee the safety.

 

*set the internal functions by computer interface

*up/down ,east/west , south/ north push button can be set mutual inhibition or not .

*power button can be set start,speed up,jump strokes, ordinary etc.

*spare 1-2 ,3-4 key can be set ordinary, interlock,jump strokes,switch etc.