PP pellets Tester MFI Tester KJ-3092



Discription:

KJ3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.

Standard:

GB/T3682-2000,ISO1133-97, ASTM1238



PP pellets Tester MFI Tester KJ-3092

Technical parameter:

Model
KJ-3092

Barrel parameters
Inner hole 9.55±0.025mm

Pistons parameters
Piston head: 9.475±0.015mm

Piston length
H=6.35±0.1mm

Paramters
Extrusion hole 1=2.095±0.005mm

Temperature parameter
With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade

Temperature range
80degree centigrade~400degree centigrade

Temperature accuracy
±0.2 degree centigrade

Display resolution
0.1degree centigrade

Maximum comsuption
< 600W

Temperature recovery time
less 4 min.

Weight parameters are as follows:

Weight accuracy
±0.5%

Basic configuration
A 0.325kg (including binder bar)

B 1.2kg

C 2.16kg

D 3.8kg

E 5.0kg

F 10kg

G 12.5kg

H 21.6kg

Position detection

Loop distance from up and down
30mm

Control precision
± 0.1mm

Test flow control

Times of cutting the material
0~10 times

Material cutting interval
0~999s(set reference Table 2)

Control flow reaches the set temperature without volatility

Barrel temperature time
15 min.

Material be installed
1 min.

Material sample temperature recovery time
4 min.

When binder set
1min