Aeon Labs Micro Smart Switch 2nd Edition

Z-Wave In-Wall Appliance Module with Energy Monitoring Capabilities

 Product Description

 The 2nd edition of the Aeon Labs Micro Smart Switch is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. It can also report immediate wattage consumption or kWh energy usage over a period of time.

The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The wireless protocol is based Z-Wave which provide a mesh network for commands to hop from node to node for reliability.

Product Highlights

Low-cost Z-Wave energy meter and on/off appliance switch
On/Off control via Z-Wave, manual Wall Switch and/or built-in button
Small form factor that fit in most gang boxes worldwide
Latest Z-Wave protocol and commands
3-Wire installation
3-Way capable. 3-Wire installation. Fits in most worldwide gang boxes
Optimized antenna range
Certifications: FCC, cUL, CE, ROHS

Technical Specifications

Powered by 90-260VAC, 50/60Hz

Output: 10A maximum output
Radio frequency: 908.42Mhz (US), 868.42MHz (EU)
Transmitting Power: 0 dBm
Range: 15 meters
Control Function: relay
Status Indicator: LED
Operating Temperature: 0-40 Celsius
Operating Humidity: 95%
Dimensions: (52x49x18.5mm)