Description

This product is based on current market conditions stolen emerging stores have a laptop, desktop computers, MP3, mobile phones, music players and other research and development in order to protect the business interests of the IT stolen goods will not be damaged. It is applicable to all goods stores. Uses range: computers, cameras, mobile phones, digital theft, etc.

It is easy to install, regardless of computers, mobile phones, cameras and other electronic goods are plug boot can work properly to achieve the anti-theft alarm. Device with a USB cable once set aside or cut lines can emit a high decibel alarm immediately. Each port can be used independently, either restore the original state after the alarm off and then boot or can not disarm the alarm, burglar break up for the lack of ordinary single-function devices on the market, and more features, more humane.
 

Function declaration

1. The hostis provided with a 10-way USB port output, connected to a USB header, theft coil, paste head, spring lines, and can build all types of connector on the device, regardless of the product or the device is switched off state can be detected, and in the security state, the connection can also be worn or wrapped around the product to achieve break alarm function.
 

2. Self-test function, the factory default setting is energized for the security status of each port. Host with memory function, power and will detect and equipment found out, the host will whistle alarm.
 

3. Oncethe alarm is triggered, either restitution or is powered off and then can not disarm the alarm, you must press the remote control to "unlock key" in order to lift, to avoid the thief tricks, and more exhibits anti-theft index higher and more secure. (Long press the reset button for 3 seconds, the host anti-rut, press 5 seconds to re-arming)

Basic Specification

Brand model	FC165D
Operating voltage	5v DC
Horn alarm output	≤120 db at 1 ft
Stand-by current consumption	≤10.0mA
Quiescent current consumption	≤3.40mA
Activation current consumption	≤220mA
The charging function	You can charge the 5V of digital Product output.
Set up defense	Remote control
Material	ABS
Size	16cm*10cm*3cm
Color	White

 

 Product operating

1. Connect one end of the cable to the alarm (USB port), the other end connected to the object.

2. The Adaptor jack plug into the alarm (on rear side). 

3.The power supply plug into AC outlet, the alarm horn chirping sound, the power is ON, the alarm panel turn ON indicator LED corresponding port, the host is already in the security state (in active position).

 4. Press red key on remote control to relief alarm, the alarm panel LED turns OFF.

 5. If the installation of equipment to port which way the light does not illuminate, indicating which way is not connected, reconnects until the LED lights ON.

 6. When the anti-theft device was break, or off line, the host immediately chirping alarm, while the corresponding port indicator light flashes, the staff on duty should be checked in the equipment of the ports and pay attention to whether there is "theft" by. Need to disarm the alarm status; you can press the Reset button (or remote button) to lift alarm.

 

 

The product includes

1. A host with 10 port

2. A 5V power

3.10 USB Cable with white paste head(2.0/bar)

4. A wireless remote control.
 

The advantage of our product

1. External alarm, db reach 120db, treble alarm to deter thieves

2. The interface pull plug it back, sustain alarm, avoid thief tricks.

3. Onboard IC, host more stable, longer life.

4. With10 white paste head 2.5m USB cable, another optional

Winding wire, stick head stickers, spring retractable cable,

 Mini top five fight.

5. Wireless remote control, 10 zone LED display, simple and

  Secure.