Foam cement machine for cast-in-place wall

Brief instruction:

Foamed concrete is a lightweight concrete derived from portland cement and common portland cement as inorganic cementing material, coal ash as admixture, sand as aggregate, mixed with organic foaming agent. Non-load-bearing walls constructed by cast-in-situ.

Foamed concrete has changed the traditional way of building walls with precast concrete segments. The excellent integrity and easy operation means low labor intensity and low building cost. Besides, good strength characteristics with reduced eight, excellent sound and thermal insulation, and water proof, etc., all these performances make it an ideal substitute of present traditional walls. 

Main machines for cast-in-place wall includes: GM2000 foam concrete mixer, GP30 foam concrete pump, stencil or formwork foaming agent etc.

GM2000 foam concrete mixer:

The foam concrete mixer mainly includes mixer, feeder hopper, foam generator, water pump, control panel, tank.

Features:

1. It could mixing variable materials, such as cement, fly ash, sand pulp, sand stone, perlite, and slag etc.

2. Specially mixing blades, mixing the material toughly, storage in its bottom is less than 10mm, no material left on the four walls internal the mixing drum.

3. Variable speed mixing and internal structure alteration make its installation easy and mixing frequency high, it saves energy. 

Technical data sheet:

GP30 foam concrete pump:

Stencil or formwork:

Main standard:

1). 450*900mm         2). 150*900mm           3). 100*900mm

Also could according to your demands to customize.

Foaming agent:

The foaming agent is a high-tech product, it has the characteristics as high expansion ratio, balanced density, foaming stability, and a long continuance, etc. Thus it is an environmental protective mighty foaming agent, which is nuisance-free and pollution-free.