This product can complete the operation of digging and loading.

Product details:

Name	backhoe loader
Items	XW-16A
Total operating weight	2950 kg
Transportation dimension	5650*1800*2550 mm
Min ground clearance	200 mm
Loading bucket capacity	0.5 m^3
Backhoe bucket capacity	0.16 m^3
Bucket discharge height	2600 mm
Buckhoe bucket height	1700 mm
Max.digging depth	2200 mm
Bucket slewing angle	180 Boom
Engine	4 cylinder,diesel engine,50HP
Rated power / speed	37kw,2400r/m

Product description:

1.It can ensure the load function is not affected and the digging type is folding slide,when digging the loading section as support,two parts to each other

2.The base plate part is heavier Isuzu axle, Four-wheel drive,strong pull,well-done in climbing slope and crossing country, good adjustability.

3.It has the advantages of low oil consumption, low maintenance cost, and so on.

4.The operator can effortlessly complete the switch of the loading and digging operation in a 360 degrees rotating seat,wide vision.

 

Note:It is 3 version of this machine,the one with quick connector to use other equipment such as pallet fork and 4 in 1 bucket,the one only hold standard bucket,the one can have Canopy or Cab.

 

Customization and after-sale service

1.For any special requests, please go to ask us for the details, we can customize the products for you if your order quantity is considerable!

2.On-line support every day.

 

Application:

It is convenient and flexible and it is suitable for final engineering of a big project,cable laying ,and the factory project such as small greening project and rental

 

Package:Standard export packing or according to your requirement.(usually one set in a 20-foot container)

Shipping:within 15-20 days after confirming the advance payment

 

                         Packing sample

 

Terms of Payment

1.100%T/T payment in advance

2.50% T/T is down payment as deposit, and 50% is paid before shipment.

3. By Escrow from Alibaba.

4. By paypal

 

Use and precautions

1.Inspection work including checking the engine oil, diesel, water lever and other parts should be done before starting up.The engine should be made out immediately if any fault appears on the meter.

2.The maximum excavating depth and height should not be over the stipulated when operation is being done.

3.An excavator should be placed on solid and fat ground rather than on a slope or in a filled area after operation.

 

Contact person