Specifications

Fireworks Firing System 
1. 24 cues remote firing system 
2. sequential and fire all firing system 
3. step fire firing system 
 

Fireworks Firing System

DE Series firing system worked by 220V/110V AC.  It has the “test” function. Each channel could fire about 20pcs igniters. This series firing system could “salvo fire”,“sequential fire”   and “step by step fire”.Time range is from 0.1-9.9s. It can be remote and manual control.  

Salvo fire & Seqential fire

"Rapid" -- sequential fire

"salvo"-- fire all

1. Salvo: The time table shows: 9.9s when the power was ready. After you press button”time”one time, the time table will change to 0.0s. Pls press”salvo”button now.

2. Sequential: Once you press the “time”button one time, the sequential time will add 0.1s. When it is adjust to the time that you need , pls press “rapid” button , it will make firing system sequential fire. If you need reset sequential time, pls cut off the power for about 2 seconds.

3. Step fire:  Pls make sure that the time table shows 0:0. Then pls press “step”button or “1.2.3”button one by one. Both way will make it fire step by step.

4. Number of cues: What the time table shows is the sequential cue numbers during the sequential fire.

Accessories & Parameters

Channels:         24

Weight:           4KG

Remote range:     80-100M.

Remote frequency : 433MHZ