Description

(1) high strength, good toughness, no bubble;

(2) Lower melting point and better smell than ABS, flow rapidly, not blocking the nozzle

(3) diameter of 3.0/1.75mm, variations + /-0.1mm,roundness +/-0.05mm;

    with laser monitor and interlock device,smooth surface,no bumps,no break,high hardness

(4) Good biodegradation, suitable for family compost degradation. Good human biocompatibility, avirulent and harmless

(5) 1 kg /spool packaging, PLA Filament has small shrinkage even when printing big size model.;

(6) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc.;

(7) density is small, when printing larger volume model lighter, save money;

(8) Luminous PLA filament available: Glow in dark green, Glow in dark green blue.

Production Control

1.Productiong quality control of ABS Filament and PLA Filament

I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.

II.keep each record filament samples sent to customers, build a tracking able document.

III.when the filament put on shelf longer than half a year, we will dry the filament again.

2.Research and developing

we have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .

Order quantity from factory:

We have 3 to 10 tons in stock each month, about 50-100kg of each kind.So you can get the best factory price here!

All of our products receive a full quality assessment as part of our production process. We run analysis on melt index, strength, elaticity as well as testing impact tolerances. We also have a full research and development department. This group is ready to modify/improve the properties of our standard products to match your company's specific needs.