The DSE 710 automatic mains failure module has been primarily designed to monitor the mains (utility) supply, starting the generator automatically should it fall out of limits, transferring the load automatically to the generator. Once the mains (utility) has returned the load is automatically transferred back to the mains (utility) and the generator cooled down before it stops. If required the generator can be started and stopped manually.

The DSE 710 module monitors the mains (utility) supply indicating the status of the mains via an LED. Additionally the module monitors the engine, indicating that the generator is running via an LED. An LCD display is used to indicate further status and alarm conditions. When a fault is detected the generator is automatically shut down, giving a true first up fault condition.

Using the module’s front panel configuration editor it is possible to alter selective operational sequences, timers and alarm trips. Comprehensive configuration and monitoring is also available using the 700 series PC configuration software for Windows™.

The module is housed in a fully enclosed robust plastic case for front panel mounting, offering a high IP rating of 56 with the optional gasket. Connections to the module are via locking plug and sockets.

 

FEATURES

• PC configurable

• Digital and analogue inputs

• Digital outputs

• Automatic mains (utility) supply monitoring

• Automatic shutdown or warning when fault conditions are detected

• Manual start

• Engine pre-heat

• Engine monitoring and protection features

• Protected Solid State (PSS) outputs

• Front panel mounting

• Front panel programming

• Tamper proof engine hours counter

• Remote start

• LED indicators

• Configurable timers

• Configurable outputs

• Configurable inputs

• Back-lit character/icon LCD display

BENEFITS

• Transfer between mains (utility) and generator power

• On-site module configuration and remote configuration (Max 100 Meters) using PC software

• User-friendly set-up and button layout

• Multiple engine parameters are monitored simultaneously

• License free PC software

OPERATION

The module is operated using the front STOP/RESET, MANUAL, AUTO, TEST and START push buttons.

An additional push button next to the LCD display is used to scroll through the modules’ metering displays.

CONFIGURATION

The modules can be configured using the front panel or remotely using the DSE810 interface and a PC.

 

As well as configuration the DSE810

interface has the ability to provide real time diagnostic facilities.