Model: | - |
---|---|
Brand: | - |
Origin: | Made In China |
Category: | Electronics & Electricity / Battery, Storage Battery & Charger |
Label: | jump starter , power charger , power banker |
Price: |
US $50
/ pc
|
Min. Order: | 1 pc |
Product Details:
1.Input:DC 12V/2A
2.Output:DC 5V/2A DC 12V/200A
3.Battery Capacity:13800mAh
4.Application: iPhone,iPad,Android Phone,Windows Phone,PCs,car engine starting,etc.
Accessories: | Quantity |
Jumper cable with clamps |
2 |
Mobile phone connector | 8 |
Laptop connector | 8 |
Cigarette lighter port connector | 1 |
USB connector | 1 |
Power charger | 1 |
Function of The Product:
1.High efficiency up to 90%,without power consumption when it is off
2.It applies to emergency jump start with 12V cars,at least to start them 10 times.
3.It applies to protable recharge for all series of branded laptop/car products(DC connector
output:12V--20V/3.5A).Voltage is adjustable.
4.It applies to recharge for all branded mobiles,MP3/4/5 and other products(USB connector
voltage/current 5V/2.1A).
5.It has muti-mode of LED lighting(LED lighting,flashing,SOS).
6.When the starter being in recharge,the indicator lights will flash in circulation.
7.The number of being-on indicator lights indicates the actual battery capacityof the starter.
8.It is smart,light and easy to carry.
9.Special material protect against explosion.
Pictures of product for reference
Function for Vehicle JUMP START
(this product is used only for 12V-start petrol cars)
1.Make sure that it cnnot be used until no less then 3 indicator lights of the starter turn on.
2.Pull out of the manual brake,put the clutch into neutral position,check the car starter's switch if
it's in OFF position.
3.Put the jump starter onto a flat places or unmoveable platform and keep it away from the
engine and the belt.
4.Connect the red clamp positive(+) electrode of the jump starter with the vehicle battery's
positive(+)electrode and assure they are tightened.
5.Connect the red clamp negative(-) electrode of the jump starter with the vehicle battery's
negative(-) electrode and assure they are tightened.
6.Check all connections are correct and tighetened.
7.Start the vehicle(no more than 5 seconds).If failing to make it start,please do it 5 more seconds.
8.Remove the clmps after makeing it started.
9.After use it,please recharge it for 2-5 hourstill 5 indicator lights all turn on,it show full charged.
WARNING
1.DO NOT use the jump starter to start a vehicle if less than 3 indicator linghts turn on,in order
that it can protect the starter from damage.
2.When connecting the cords to start a vehicle,be careful enough to identify clearly the
polsrity and relating output.
3.If failure to start a vehicle takes place(in 3-5 times),DO NOT force to continue,check again if
there are any other faults in the car or the product,otherwose it may cause damage to the
product.
4.When being recharge,DO NOT put the product onto inflammable material(bed or carpet).
5.When recharging,the temperature shall be kapt in its range between 0-40°c.
6.Please contact with our distrubutors for abnormal problems or failures when being in charge.
Company Information
Angotan Products,co ltd. is well-known as a leader in providing quality auto parts to the aftermarket. We've earned our reputation for excellence from long term of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. Our prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere. At Angotan, we take pride in the quality of our products and in your satisfaction.
Should you have any question,please contect us with no hesitate!
website:www.angotan.com
ANGOTAN(Guangzhou) Auto Parts Co.,Ltd | |
---|---|
Country/Region: | Guang Dong - China |
Business Nature: | Manufacturer |
Phone: | 87701560 |
Contact: | Nicole Zhang (Sales assistant) |
Last Online: | 08 Mar, 2014 |