SS304FG Spiral wound gaskets with outer ring

SW600-CG Outer Ring Type

Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.

SS304FG Spiral wound gaskets with outer ring Typical Applications
Pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc.
Petrochemical, chemical, mechanical manufacturer, power station, metallurgy, shipbuilding, medical and pharmaceutical unclear power station and navigation, etc.

SS304FG Spiral wound gaskets with outer ring Prime Features
> Gasket are made in a wide variety of sizes and shapes.
> Combinations of metal strip and filler are selected to suit the specific fluid media and operating conditions.
> Quick to install and remove
> Make gaskets suitable for high pipeline pressure on flat or raised flange faces.
> Temperatures from cryogenic up to 1000 °C

SS304FG Spiral wound gaskets with outer ring Specifications
> Products are manufactured in accordance with all relevant gasket standards to suit flange designations: ASME B 16.20, ASME B 16.5, BS1560, ASME B 16.47 A (B), BS EN 1092, DIN, JIS, and NF, etc.
> Color cord as ASME B 16.20 on request.

More information for SS304FG Spiral wound gaskets with outer ring ,please contact with sunwell sealing co.