DP-DC 12V/24V DC RO system water pump diaphragm high pressure water pump

1 Low noise, high pressure, excellent self-priming 5 m(16.4ft). works with 12V or 24V.

2. Medium temperature can reach 60 °C(140°F).

3. Dry running is permissible.

4. Built-in pressure switch to protect pump running from being damaged.

5. Built-in relief valve control the normal operation of the pump.

6. Easy dismantling.

7. Safe low voltage, ensures personal safety.

Product application:                                                                                                

1.Household water booster and car wash, sea water desalination for ship                                                                      

2.Water purification system, filter, spray equipment, general industrial equipment, chemical metering, hygienic, pollution control, printing

 Installation guide:

1.Before installation, pull out the cap in inlet and outlet.

2.Pump should be installed in horizontal. If works in vertical, pump head should be downward.

3.Install a filter in the inlet pipe to guarantee valid use and long life cycle.

4.Pump base points are available with nylon base, iron base rubber support. 

5.DC Pump is forbidden to connect to 220V AC power directly, an voltage transmitter is needed.

6.Pump can work for water, weak acid, base and salty water, etc. Can not work for liquid with grain, gasoline and other inflammable fluid.

Performance data:

Note: 1.  Only DP-60 has brushless motor type.   

          2. Each model can do AC220~240V 50Hz single motor, MOD is 50pcs.