Applications of PVC edge band:

PVC, full name Polyvinylchlorid, the main ingredients of PVC, polyvinyl chloride resin is the main raw material, adding an appropriate amount of anti-aging agent, modifier, after mixing, calendering, vacuum forming and other processes madematerials. PVC material can be divided into soft and hard material PVC.
   PVC edge banding can be classified according to their shape and flat shaped PVC edge banding edge banding. Flat edge of the kitchen is mainly used in furniture, teaching equipment, laboratories, doors, decorative and other industries. Mainly used not used for particleboard, MDF solid cross-section of the seal, play shut up, decoration, to prevent the sheet itself contains harmful volatile gases, such as to prevent the board by the water damage and other unfavorable factors. Flat edge of the common specifications, generally ranging from 0.5 ~ 3mm thickness, width 9 ~ 180mm range. Width depends on the determination of the thickness of the sealing plate, generally more than 3 ~ 4mm plate can be. More than a few mm trimming the main to provide margin. Thickness of the major decisions based on the actual needs of customers, thicker edge effect is more obvious, the more angles the better grades. However, the higher the thickness of the thicker, which means the use of cost increases. Shaped edge of the shape is different from the flat, wide and thick, like a regular flat to be found, each with a different shape. Shaped the development of the major needs of the customer's actual use of special development. Shaped mainly used in furniture, doors, cars, trains, chairs, etc., played shut, decoration and so on. Because generally flat shaped heavy-weight ratio, the output is not high, the production process more cumbersome and other reasons, the price much more expensive than flat.