Hot Rolled ASTM A242 Sheets Plates Coils 

We are Stockholder & Distributors of CORTEN-A, CORTEN-B, S355JOWP, S355JOWP+N, S355J2WP, S355J2WP+N, S355JOW, S355JOW+N, S355J2W, S355J2W+N, IRSM41-97, IRS-M41, IRSM-41, IRS-M41, IRS-M41-97 JIS G3125 SPA-H, JIS G3125 SPA-C, ASTM A242, ASTM A588 CORROSION RESISTANT / WEATHER RESISTANT STEEL SHEET, PLATE COLD ROLLED & HOT ROLLED, ASTM A423, ASTM A847 WELDED ERW SEAMLESS TUBES, PIPES, ROUND, SQUARE, RECTANGULAR

 

ASTM A242 / A242M - 13

Standard Specification for High-Strength Low-Alloy Structural Steel

 

This specification covers high-strength low-alloy structural steel shapes, plates, and bars for welded, riveted, or bolted construction intended primarily for use as structural members where savings in weight (mass) or added durability are important. Steel specimens shall be semi-killed or killed. Heat analysis shall be performed wherein steel specimens shall conform to required chemical compositions of carbon, manganese, phosphorus, sulfur, and copper. Atmospheric corrosion resistance shall be estimated for steel specimens. Specimens shall also undergo tension tests and shall conform to specified values of tensile strength, yield point, and elongation.

1.1 This specification covers high-strength low-alloy structural steel shapes, plates, and bars for welded, riveted, or bolted construction intended primarily for use as structural members where savings in weight [mass] or added durability are important. The atmospheric corrosion resistance of the steel in most environments is substantially better than that of carbon structural steels with or without copper addition. When properly exposed to the atmosphere, this steel can be used bare (unpainted) for many applications (see Note 1). This specification is limited to material up to 4 in. [100 mm], inclusive, in thickness.

Note 1—For methods of estimating the atmospheric corrosion resistance of low-alloy steels, see Guide G101.
1.2 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.

1.3 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.4 For structural products produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A6/A6M apply.

 

ASTM Standards

A6/A6M Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

G101 Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

Keywords

Atmospheric Corrosion - Bars, Rods And Rebars - Bolted Construction - Bolting And Riveting - Corrosion Resistance - Durability - High-Strength Low-Alloy Steel - Mass, Volume And Weight - Plates - Riveted Construction - Steel Bars - Steel Plates - Structural Steel - Weight - Welded Construction - Welding

 

CORROSION RESISTANT AND WEATHER RESISTANT STEEL CAN BE ALSO SUPPLIED ACCORDING TO FOLLOWING STANDARD & SPECIFICATIONS :   

COR-TEN® A, COR-TEN®A, COR-TEN A, CORTEN-A, CORTEN A - Hot Rolled / Cold Rolled Sheet, Plate, Coil 
COR-TEN® B, COR-TEN®B, COR-TEN B, CORTEN-B, CORTEN B - Hot Rolled / Cold Rolled Sheet, Plate, Coil 
ASTM A588 Grade A, ASTM A 588 Grade-A, ASTM A-588 Grade A - Hot Rolled / Cold Rolled Sheet, Plate, Coil 
ASTM A588 Grade B, ASTM A 588 Grade-B, ASTM A-588 Grade B - Hot Rolled / Cold Rolled Sheet, Plate, Coil 
ASTM A588 Grade C, ASTM A 588 Grade-C, ASTM A-588 Grade C - Hot Rolled / Cold Rolled Sheet, Plate, Coil 
ASTM A242 Type 1, ASTM A242 Type-1, ASTM A-242 Type 1 - Hot Rolled / Cold Rolled Sheet, Plate, Coil 
S355JOWP EN 10025-5, S355JOWP EN10025-5, S355 JOWP EN-10025-5 - Hot Rolled / Cold Rolled Sheet, Plate, Coil
S355JOWP+N EN 10025-5, S355JOWP+N EN10025-5, S355 JOWP+N EN-10025-5 - Hot Rolled / Cold Rolled Sheet, Plate, Coil
S355J2W EN 10025-5, S355J2W EN10025-5, S355 J2W EN-10025-5 - Hot Rolled / Cold Rolled Sheet, Plate, Coil
S355J2W+N EN 10025-5, S355J2W+N EN10025-5, S355 J2W+N EN-10025-5 - Hot Rolled / Cold Rolled Sheet, Plate, Coil
S355J2G1W EN 10155, S355J2G1W EN10155, S355 J2G1W EN-10155 - Hot Rolled / Cold Rolled Sheet, Plate, Coil
S355K2G1W EN 10155, S355K2G1W EN10155, S355 K2G1W EN-10155 - Hot Rolled / Cold Rolled Sheet, Plate, Coil
S355J2G2W EN 10155, S355J2G2W EN10155, S355 J2G2W EN-10155 - Hot Rolled / Cold Rolled Sheet, Plate, Coil
S355K2G2W EN 10155, S355J2G2W EN10155, S355 K2G2W EN-10155 - Hot Rolled / Cold Rolled Sheet, Plate, Coil
SAILCOR IRSM41, IRSM-41, IRS-M41, IRS-M41, IRS M41-97 FOR RAILWAY WAGON & CONTAINER - Hot Rolled / Cold Rolled Sheet, Plate, Coil
JIS G3125 SPA-H, JIS G3125-SPAH, JIS:G3125-SPA-H, JIS-G3125 Grade SPA-H, G3125-SPAH - Hot Rolled / Cold Rolled Sheet, Plate, Coil
JIS G3125 SPA-C, JIS G3125-SPAC, JIS:G3125-SPA-C, JIS-G3125 Grade SPA-C, G3125-SPAC - Hot Rolled / Cold Rolled Sheet, Plate, Coil

 

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3     
 

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

 

MUKESH SHAH 
Director      
Mobile No. 0091 - 9820292499      
Email - marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS  
( A METAL & STEEL Company )      
57-A, KHATARGALLI,      
THAKURDWAR,      
MUMBAI - 400002, INDIA.      
TEL.No. 0091-22-23858802      
TEL.No. 0091-22-23823963      
FAX No. 0091-22-23898724      
Email - marketing@rolexmetals.com  
Website – www.rolexmetals.com

      
 

CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com

 

COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com

WAREHOUSE MANAGER – warehouse@rolexmetals.com

SALES DOMESTIC – salesdomestic@rolexmetals.com

SALES INTERNATIONAL – salesinternational@rolexmetals.com

SALES GENERAL – sales@rolexmetals.com

PURCHASE GENERAL – purchase@rolexmetals.com

FINANCE MANAGER – finance@rolexmetals.com

ACCOUNTS MANAGER – accounts@rolexmetals.com

GENERAL INFORMATION – info@rolexmetals.com

 

EXPORT MANAGER – export@rolexmetals.com

IMPORT MANAGER – import@rolexmetals.com

AIR EXPORT – airexport@rolexmetals.com

SEA EXPORT – seaexport@rolexmetals.com

CUSTOMS – customs@rolexmetals.com

 

AIR FREIGHT – airfreight@rolexmetals.com

SEA FREIGHT – seafreight@rolexmetals.com

DESPATCH – despatch@rolexmetals.com

INSPECTION – inspection@rolexmetals.com

LOGISTICS – logistics@rolexmetals.com

TRANSPORT – transport@rolexmetals.com

 

KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com

TALOJA WAREHOUSE – taloja@rolexmetals.com

KHOPOLI WAREHOUSE – khopoli@rolexmetals.com

NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com

KANDLA WAREHOUSE – kandla@rolexmetals.com

MUMBAI WAREHOUSE – mumbai@rolexmetals.com

STOCKYARD – stockyard@rolexmetals.com

 

SERVICE – service@rolexmetals.com

SUPPORT – support@rolexmetals.com

RECRUITMENT – career@rolexmetals.com

WEBMASTER – webmaster@rolexmetals.com

CUSTOMER CARE – customercare@rolexmetals.com