LPB14 High Performance Butterfly Valve

Model:	LPB14
Brand:	Lapar Control Valve
Origin:	Made In China
Category:	Industrial Supplies / Machine Hardware / Valves
Label:	butterfly valve , lined butterfly valv , control valve
Price:	US $50 / pc
Min. Order:	1 pc

Product Description

Valve Manufacturer – Butterfly Valve – Control Valve – Ball Valve – Lapar Valve

Valve Manufacturer – Butterfly Valve – Control Valve – Ball Valve – Lapar Valve

LPB14 High-Performance Butterfly Valve - Lapar Valve

High Performance Butterfly Valve

Design Feature

Horizontal pin: Reduce the exploding possibility of stem effectively under the internal unbearable pressure.
Disc: There is no stem through disc completely for less resistance and more flow capacity.
Stem: The design of two section of stem, can enhance the stability and resistance of disc effectively.
Guide bearing: It is made by nylon and can ensure that the shaft rotate in absolute center,to decrease friction and torque.
The seat with backrest: It is consisted of inner backrest and outer rubber.the backrest can withstand the deformation of seat when it is scoured and squeezed to extend service life.

LPB14 High-Performance Butterfly Valve Design Feature

Standard

Main Features

Tight sealing and zero leakage under rated pressure(1.0Mpa~1.6Mpa).
Multi-sealing design separates valve body from working medium to ensure zero leakage.
Main parts are designed to fit exactly into each other to ensure a better sealing, smaller torque, bigger flow, lower fluid resistance as well as flexible two-side flow.
Scientific design for the sealing surface of valve seat makes a closed connection between the valve and the pipe flange without any additional ccessories.
Designed and produced based on multi-standard system, so the valve could be applied to various of flange and enjoy excellent interchangability.
All parts are embalmed, suitable for various complex work environment.
Others: According to customer requirements.

Parameter

Actuator	Electric, Pneumatic, Turbine, Handle
Control	On-off, Modulating, Inteligent
DN	50~1200mm
Pressure	150~300Lbs
Temperature	EPDM: -29~120°C, FPM: -29~150°C PTFE: -29~150°C, CR: -29~80°C NBR: -29~80°C, SI: -29~200°C
Connection	Wafer
Structure	A Type, LT Type
Body Material	SS304L, WCB, Casting Iron, Ductile Iron
Disc Material	SS316L, SS316, SS304, Casting Iron, Casting Iron+Nylon11 B148, FEP (Casting Iron+F46)
Seat Material	NBR, EPDM, PTFE, FPM, CR, SI
Medium	Gas, Water, Oil
Option	Limit Switch, Positioner, Solenoid Valve, Pressure-relief Valve