In-Wall Sub with Dual 8in Woofers (Passive) - IW08
  |
| Pictures |
Click for larger photo
| Main Feautures |
The new In-Wall Subwoofer from TSD Audio is our crown jewel. The fusion of smart engineering with top notch components makes this piece a true testament of TSD’s manufacturing abilities. It delivers peak performance, exceptional accuracy, and a low-end response through two eight inch woofers with woven fiberglass and an oversized voice coil. This system is housed in a 4” deep backbox to ensure low distortion. It is easy to install and is ideal for mid to high-end home theater applications.
Have your cake and eat it too
When you’re designing the perfect home theater system for your customers, we understand that you need to deliver a killer sound that will raise the roof. However, achieving that killer sound is not the only consideration. You must pay attention to the aesthetics of the room, and more importantly, comply with the almighty WAF (Wife Approval Factor). Our new In-Wall Sub makes it easy to meet both of these challenges! It provides a brilliant sound as well as being eye pleasing and space conscious. Hence, have your cake and eat it too!
The ingredients
To ensure exceptional audio quality, this Sub has been equipped with premium driver components that were specifically designed and fine-tuned for the enclosed 8in speakers. To top it off, this product was engineered to pack a serious punch by delivering the truest bass sound. This low-frequency masterpiece is sure to blow you away!
|
| Details |
 |
Powered EQ Box
In order to filter and optimize the bass signals, we’ve included this active equalizer box which is intended to be connected between the receiver and the amplifier. See diagram below. |
 |
Hitting the competition where it Hertz
Unlike our competitors, our Sub is enriched with an impressive frequency response that goes as low as 25Hz. So, you won’t just hear this Sub…you’ll feel it! |
 |
EZ Installation
Just like a typical In-Wall Speaker, this Sub installs with ease using the provided cutout template. Trace the template. Cut out the wall board. Snap the Sub into place with the pre-installed dogleg brackets. |
 |
Low profile Grille
For a super clean look, this sub is equipped with a low profile magnetic grille that not only is secured by super strong neodymium magnets, but snaps into place using rigid tabs as well. To ensure this grille doesn’t bow or rattle we incorporated an anti-vibration pad with an adhesive back which is intended to be placed between the sub front faceplate and the grille. Enjoy! |
 |
We’re picking up no vibrations ♫♫♫
To separate the subwoofer from the drywall and reduce vibrations that may cause disturbance in the next room, we’ve pre-installed 6 rubber pads to the backside of the sub. We’ve also equipped this sub with 2 additional pads. One is allocated for the front face of the sub and is designed to be placed in the center between the speaker and the grill to prevent the grill from rattling. The other piece is to be used at your discretion and can be applied as needed. |
|
| |
| Specifications |
| Woofer |
Dual 8" Woven Fiberglass Sandwich Cone, High Temp 1.5" diameter Voice Coil |
| Power handling |
430W RMS, 1050W Peak |
| Nominal Impedance |
8 ohm |
| Frequency Response |
(-6dB) 25Hz ~ 200Hz |
| Sensitivity |
84 dB (-2.83V / 1 meter) |
| Color |
White grill / Black enclosure |
| Connector Type |
Gold Plated Spring Loaded Binding Posts |
| Weight |
31 lbs |
| Grill Type |
Slide Lock / Magnet Attached Aluminum Perforated Mesh |
| Cutout Dimensions |
12.2" x 22.2" |
| Mounting Depth |
4" |
| Finished Dimensions |
23.7" H, 13.7" W, 4.13" D (4.25" D with attached grill) |
| EQ Box Dimensions (WxHxD) |
4.68" x 1.46" x 1.81" |
| EQ Box Adaper |
Included |
| Power Supply / Adapter output |
30V dc 100mA ,2.4W. |
|
| |
|
|
|
