small hammer crusher  application scope
 This series machine can widely used in medium hardness and brittle materials,such as this materials like  limestone,
 coal,etc.The highest pressure of the materials is 150kg.Mainly used in concrete,mine,generate eledricity,coal dressing,buliding  materials,chemical,etc.
small hammer crusher Feature
This product breaks up materials through the collision of the fastrotating ram and  materials ,it has simple structure ,big crushing ratio,and high production efficiency,which can make two forms of beraking up :dry abd wet,it is suitable for secondary and fine break for brittle and medium hardness materials in field like mine .cement .coal.metallurgy,construction .high way,fuelbosed industry ,etc,this equipment can adjust the cleft and the discharging granularity as the customers request to satisfy different needss of different customer
small hammer Operating Principle:
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.