Automatic access control swing barrier
 
Key Words: Swing Barrier, Swing Gate, Swing Turnstile, Turnstile Gate, Pedestrian Barrier, Access Control Turnstile
 
Features and Functions:
 
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop
 working automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipments). 6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 
seconds), the system will cancel the authority of the current user automatically.                                             7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access 
controller needed)9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator. 11. Gate auto opens when power off and auto close when power on, complying with fire safety
 requirements.  12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.                                                         13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function (optional).