~Specifications:
Single component
Can applied directly on rusty surface
Completely water-based, Eco-friendly
Quick drying High coverage
Rust anti-corrosive protection
Good color retentions.
~Product Description
Single component waterborne Acrylic (modified ) paint for steel structure building, infrastructure, power generation, water waste water,  mining and minerals, steamship
Performance Features
Can be applied directly on rusty steel( rust layer ≤45um)!
Color and Appearance: Grey or others
Coating Thickness um: 50±5mm
Solid Content % : 69±3%
Density: 1.36g/m3
VOC: <50g/L
Dry Time:
Primer Dry Time (≤50%R.H.)
Temperature ≥-5°C 5-15°C 20°C 25°C 30°C 35°C 40°C
Surface Dry Don’t dry ≥1 hr 35mins 25mins 20 mins 15 mins 10 mins
Hard Dry Don’t dry ≥4 days 42 hrs 36 hrs 30 hrs 24 hrs 18 hrs
Primer may dry quicker in operation , please still follow this instruction
 Theoretical Coverage: 12m2/L
Overcoating Interval: Minimum: 4 hours MAX: unlimited
Recommended substrate conditions and temperature:
1.Remove all oil or grease, soluble contaminants and other foreign matter. All surfaces to be coated should be clean, dry and free from contamination.
2.If applied on the rusty surface, the rusty layer thickness should be below 45 um
3.Apply in good weather, don’t let coating contact any liquid like water or other solvent before completely dry. No painting be carried out in rainy day outdoor ,if the humidity is above 85%, please stop painting
4.The temperature of substrate should be above 5°C, lower temperature might not dry or cause a long time to dry
Air Spray:Nozzle orifice: 1.5-2.5mm
Nozzle Pressure: 0.3-0.5MPa
Airless Spray:Nozzle orifice: 0.4-0.5mm
Nozzle Pressure: 12-15MPa
Brush : Use soft bursh
Recommended Finish: RSL series finish
Shelf Life: 12 months
Over Coating Time
Substrate
temperature 5°C 15°C 25°C 35°C 45°C
Minimum interval 24hrs 7hours 4hours 3hours 2hours
Maximum Interval Unlimited
 
 
 
Storage Temperature : 5-30°C in well ventilated warehouse
Stir thoroughly before painting, don’t use any steel or other metal stick to stir the paint, it will affect the quality of this product.
Attention :
This datasheet is made based on the lab test, it is believed to be true and accurate. As workmanship, weather, construction equipment, quality of other materials and other variables affecting results are all beyond our control, we do not take any responsibility for the consequences caused by improper use of this product.