Product features:
FC-Q11A hand push the ground running machine, suitable for highway, bridge, railway, water conservancy, electric power, airport, bridge, parking lot and municipal buildings, building, building decoration, reinforcement engineering and other concrete construction of the surface of the surface of the removal, granite decorative surface of the cutting process, so as to achieve uniform roughness. The latest technology of the machine is for the high-speed railway, highway C50 concrete and the design of the four prism type cutting head and high sealing sealing device. This product is widely used on all kinds of old ground before refurbishing floor processing, remove damaged raised floor of part of the epoxy resin, anti slip surface, blind and a new surface roughening. Fully reflect the low cost and high efficiency of the application value, and has the advantages of beautiful appearance, stable performance, flexible operation, easy handling, etc..
Product overview:
Hand pushed to the ground walking type chiseling machine, the working width 420mm, above 11 alloy chisel feather, attack frequency per minute 11*2200=24200 phase is equal to 24200*44=1064800 a chisel point; per hour chisel gross area up to 20~70m2 (penetration 10mm, concrete grade between the C30, C50) at the same time the biggest characteristic is can quickly the replacement alloys chiseling a shoe head to ensure low cost and high-efficiency operation. In addition to its unique four prism to strengthen the type of alloy chisel hair boot head, but also increased its impact force, the effect is more obvious, and has the characteristics of the use of multiple repair, can extend the service life of the cutting head.