1. Application filed

 

CS04 universal car oil level sensor using tomography technology, the dynamic analysis of all kinds of sensors in the medium parameters, automatically refresh the reference and precise compensation. A single sensor can measure the change medium or change the installation environment, without the calibration can be automatic adaptation, accurate measurement, not affected by dielectric constant and the temperature change.

 

 

For example a CR - 6061-3 cars after the oil level sensor installed on the car, the car from moving south to the north of our country, no matter how its fuel label change, or add any additives need to calibrate can accurately measure the oil level. And factors such as temperature, radio frequency interference is no effect on the sensor.

 

CS04 type automobile oil level sensor, communication bus output temperature signals at the same time, the precision of 0.1 ℃

2.Performance indicators

 

Low detection range: 0.05~1 m

Accuracy: 0.1

Loading  pressure range: according to the requirements

Ground pole diameter: Φ 16

Power supply voltage: 12 ~28 VDC

Medium temperature: - 50-125 ℃

Output signal:4-20mA/0-5V/0-10V/RS485/RS232/Can bus communication

Fixed way: threaded M20 * 1.5 or flange installation, special specifications can be customized as required

Level of explosion-proof: this Ann Exia Ⅱ C T6, flame-proof Exd Ⅱ C T5

3.Ordering information

1.measuring range

2.pressure range

3.Output signal

4.Fixed way

If you have special demands,please feel free to contact us,we'll reply you within 24 hours.

 

 

 

 

http://www.gpsandsensor.com