Item description: It belongs to the differential pressure flowmeter system,which is often used for measuring the gas, steam, liquid, mixing gas, etc. Also consists of sensor (L-shape and S-shape), flow counter, differential pressure transmitter and some parts of valves. If there is any compensation of temperature and pressure needed, the transmitter will be also need equipped when measuring.

1. Technical Parameters and Functions

DN: 15 ～ 2000mm

Flow rate (m/s): liquid  0.1 ~ 12 ; steam or gas: 5 ~ 160

Liquid: water, oil, alcohol, methylbenzene, liquid ammonia.

Gas: blast-furnace gas, coke oven gas, mixing gas, chlorine, hydrogen, oxygen, air, nitrogen etc.

Steam: saturated steam, superheated steam.

Accuracy: ± 1%

Operating ambient: temperature -10 ～ +45℃, humidity ＜ 85%

Sensor: temperature -50 ～ +600℃ pressure 0 ~ 16MPa.

Signal output: 4 ~ 20mA   RS-485   RS-232.

Energy source: 220VAC, 50Hz.

Function: display instantaneous and accumulation flow (under the standard ambient), pressure, differential pressure, temperature, date, time, etc.

Elbow sensor

Model: L-shape and S-shape

The L-shape sensor should be installed at the 90° angle of the pipe but the S-shape sensor could be at anywhere of the straight pipe.

Connection style: welding connection or flange connection. 

Operating condition for L-shape sensor:

DN: 15 ~ 4000mm

β: 1.0 ~ 5.0