Woven wire mesh for interior walls and facades plaster

Plastering soft woven wire mesh with square mesh opening made from carbon wire with anticorrosion zinc coating or without zinc coating. Plaster mesh woven wire greatly facilitates work on finishing of buildings and facades. Using it can prevents cracks occurring by shrinkage material and significantly increases the mechanical strength and durability of the plastering layers.

Woven plastering Mesh applications:

• For the restoration and reinforcement in plaster works.
• As a reinforcing material in painting and decorating interior walls and facades.
• Increases the mechanical strength and durability of the plastering layers.
• For prevention of deformation, shrinkage occurring materials.
• To enhance the strength of finishing layers.

Woven wire mesh plaster technical specifications
Materials: heat-treated low carbon galvanized wire or black wire.
Square mesh - mesh size 2mm to 20mm.
Wire diameter 0.4mm to 2.5 mm.
Roll width: 1000mm, 1300mm, 1500mm, 1800mm, 2000mm, 3000mm.
Roll length: 30m, 50m, 60m, 80m.

In construction, usually use plaster mesh fabric with mesh size from 8mm to 14mm, for example, 12×12×1.0mm, 12×12×1.2mm, 14×14×1.2mm and 14×14×1.4mm woven mesh fabrics are the most often used.

Plastering soft woven wire mesh fabric in black color

Rolls of black soft woven plaster mesh in our warehouse

Our plastering woven mesh is producing under strictly quality control: interlacing wires warp and weft woven in a grid must be right, no skip wires, no mechanical damage, kinks, broken and stitched seats.

Packing woven mesh
Rolls of fabric mesh must be annealed wire tied around the edges and the middle of the roll. The ends are wrapped with a paper roll, then the polymer film or fabric packaging. Usually, A roll weight no more than 80 kg.