Removes Water from 100 ppm down to 10 ppm in a single pass and down to 5 ppm after 3 passes (ASTM method D-1533)
Removes Particulate Matter to 5 microns as standard or down to 0.3 micron (optional)
Improves dielectric strength up to 65 kV
№                 Specifications             Value
1 Production capacity, m3/h: 0,16
2 Treated oil parameters:
- water content, ppm, maximum 5.0
- purity class (ISO 4406), minimum 9 (-/15/12)
3 Nominal filtration rate, mkm 0,3…5
4 Outlet oil temperature, °С 60
5 Oil Pressure on outlet, Mpa, minimum 0,2
6 Heater power consumption,kW, maximum 4,8
7 Total Power Consumption, kW 6
8 Electrical outlet parameters 50/60 Hz, V 380/220
9 Dimensions, mm, maximum length/width/height, mm 980/650/1550
10 Weight, kg, maximum 230

GlobeCore CMM 0.16 – the most compact in the range of GlobeCore Oil Purification Plants is designed for removal of free and dissolved water and mechanical contaminants from insulating, turbine, compressor and lubricating oils. It is ideally suited for servicing of transformers and other electrical equipment installed in basements, mines and other places with restricted access. Globe Core CMM 0.16 is available in semi-automated, automated (PLC controlled) and explosion proof versions. Optional equipment includes moisture probe, flowmeter with totalizer and 0.3 micron fine filter.

GLOBECORE CMM 0.16 COMPONENTS DESCRIPTION

GLOBECORE CMM 0.16 COMPONENTS DESCRIPTION
Vacuum System
Rotary Vane Positive Displacement Pump
Pumping Speed 7 m3/h
Ultimate pressure 0.5 mbar
Oil Pump
Gear pump with power consumption of 0.7 kW and capacity of 0.8 m3/h is utilized to draw oil in and out of the vacuum system. Electric motor is protected by overload.

Vacuum Chamber and Oil Heater
Vacuum Chamber and Oil Heater are mounted in the same steel Vessel to reduce unit’s overall weight and dimensions.
Vacuum Chamber has an oil sprayer, provided to maximise exposure of oil to the effect of vacuum.
Coalescer Filter is installed between Vacuum Chamber and Vacuum Pump to ensure that no oil is drawn into the Vacuum Pump.
4.8 kW Oil Heater with a low watt density heating elements (1.2 W/cm2) comes complete with thermometer and thermostat. Optionally heater can be controlled by electronic temperature controller or PLC.

Filters
A Mesh Strainer is provided to remove large particles that could cause damage to the Inlet Pump. 5 microns Coarse Filter is installed on entry to the Vacuum Chamber. Oil receives its final treatment by passing through the Fine Filter designed to remove 99.9% of particles larger than 2 microns or 1 micron (optional).

Instrumentation and Controls
The Control Panel is a dust proof enclosure to IP 54 featuring the following elements:
Manometers – are installed to monitor the state of Coarse and Fine Filters.
Vacuum Meter is provided to moninitor vacuum level in the chamber.
Temperature controller (optional) – takes an input from temperature sensor and connected to a control element of the heater.
Power and Heating Indicators and Switches, Oil Pump Switches and PLC with Mnemonic Diagram (optional).
Emergency Stop Button – is provided for safe shut down of the plant in case of emergency.

GlobeCore CMM 0.16 Flow Diagram

1– vacuum chamber, P– gear pump; VP – vacuum pump; МV– vacuum meter; М1-М2– manometers; F1– coarse filter; F2– fine filter; MF– mesh filter; SV– safety valve; KO– return valve; МО– coalescer filter; Т– bimetallic thermometer; ТS– thermostat; К1– inlvet valve D20; К3-К5– drain valves D15; К6– by-pass valve D 15; К2, К7– three-way ball valves D 15; S1– oil inlet; S2– oil outlet