Professional mini incubators for hatching eggs

 

Chicken Egg Incubator Characteristic

It is suitable for the families and specialized households to incubate chickens, birds, ducks and geese, etc. This incubator is produced under strict CE test and has good reputation from the peasants in the rural area ,especially in eastern European countries. The incubator has the characteristics of strong practicality, Easy operation and long service life, etc

Chicken Egg Incubator Product Function

 1) Automatic egg turning for incubator 

2) High and low temperature alarm, high and low humidity alarm

3) Recorded days of incubation 

4) Add water outside with free water dropper

5) Lower cover is transparent, very easy to observe

6) Easy to operate. Automatic temperature control and automatic incubator display for temperature&humidity

1.Testing you unit for the first time:

1.1 Connect the egg turner plug to the control plug inside the egg compartment.

1.2 Connect the provided power supply to the back of the unit and your power source.

1.3 Switch on your power source.

1.4 Switch your unit on.

1.5 You will hear an alarm sounding due to low temperature/humidity.

1.6 Press any of the green buttons to cancel the alarm.

1.7 By opening the incubator and filling the water channels you will notice the humidity reading increase.

1.8 Let the unit run for 2 hours to note the egg turner turning.

Incubator ,chicken incubator , egg incubator 

 

2.Setting the temperature

2.1 Push “SET” once.

2.2 Push “+” or “-“ to select the desired temperature.

2.3 Push “SET” once more to exit.

- These incubators are factory set at 38oC, I found the chicks hatch at day 19 to 

20 meaning the temperature being to high. Using the method as described above. I recommend you set the temperature at 37.6oC.

3.Temperature alarm parameter settings (AL and AH)

The temperature alarm is factory set to sound at 1oC over or below the set temperature. This is sufficient and you do not need to make any changes to these settings.

3.1 Low temperature alarm parameter setting. (AL)

3.1.1 Press and hold “SETT” for 3 sec.

3.1.2 Push “+” or “-“ until code “AL” appears in the temperature screen.

3.1.3 Push  “SET”

3.1.4 Push “+” or “-“ to adjust to your desired lower alarm setting.

3.2 Higher temperature alarm parameter setting (AH)

3.2.1 Press and hold “SETT” for 3 sec.

3.2.2 Push “+” or “-“ until code “AH” appears in the temperature screen.

3.2.3 Push  “SET”

3.2.4 Push “+” or “-“ to adjust to your desired higher alarm setting.

Incubator ,chicken incubator , egg incubator 

4.Humidity alarm parameter settings (AS)

The humidity is factory set to sound at 60% .

(Note: it can be adjusted according to your  incubating request.)

4.1 humidity parameter setting. (AS)

4.2 Press and hold “SET” for 3 sec.

4.3 Push “+” or “-“ until code “AS” appears in the temperature screen.

4.4 Push  “SET”

4.5 Push “+” or “-“ to adjust to your desired humidity.

- By filling both water channels depend on the  local humidity levels and the time of year, and how much water inside the incubator and humidity to determine whether it need to add water or not.

Incubator ,chicken incubator , egg incubator 

5.Calibrating temperature sensor reading (CA)

The thermometer correct reading is set at 0oC. The reading given by the thermometer can be adjusted if you find that the temperature reading is incorrect using a calibrated thermometer.

5.1 Calibrating the temperature sensor measurement. (CA)

5.2 Press and hold “SETT” for 3 sec.

5.3 Push “+” or “-“ until code “CA” appears in the temperature screen.

5.4 Push  “SET”

5.5 Push “+” or “-“ to adjust to the correct measurement.

- Note that the adjustment is the difference between the thermometer readings

  and should be adjusted with “- “ if the temperature reading of the incubator is to

high and normal value (indicating + value) if the incubator reading is too low.

Incubator ,chicken incubator , egg incubator 

6.Temperature Upper and lower limit set (HS and LS)

HS - (High Set) and LS- (Low Set) set the limit of the setting range of the desired temperature setting (incubating temperature adjustment)

 

If HS is set as 38.2 and LS is set as 37.4, then the desire temperature (incubating temperature adjustment) can only be changed from 38.2 to 37.4, so the minimum temperature shall be limited to 37.2 even if the “-“ is kept on pressing. The same goes for the High Set Limit.

- This is to prevent accidental out of range temperature setting.

Incubator ,chicken incubator , egg incubator 

Voltage	220V/ 110V/ 220V&12V
Frequency	80 W
Capacity	48 chicken eggs, 132 Quail eggs
Temperature Control	30-42
Humidity Control	20-85%
Package Contents