MS8902 non-contact voltage tester
| Model: | MS8902 |
|---|---|
| Brand: | HY |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Other Electronic Instrument |
| Label: | non-contact tester , dc voltage tester , pen voltage tester |
| Price: |
US $588
/ pc
|
| Min. Order: | 1 pc |
Product Description
MS 8902 multifunction process calibrator
LCD display,,LED back light,Data hold,Diode,Continuity,Insulation test,
auto power off,max value measuring&hold,
DC &resistance& Frequency& Temperature¤cy& Duty Cycle&capacity measuring,
Details
|
Operating temperature |
-10℃to 50℃ |
|
Storage temperature |
-20℃to 70℃ |
|
Operating altitude |
3000 meters above mean sea level |
|
Relative Humidity (% RH operating without condensation) |
75%(30℃ to 40℃) / 45%(40℃ to 50℃) 35%(50℃ to 55℃) / uncontrolled < 10 °C |
|
Stability |
± 0.005 % of range/°C outside of 23 ± 5 °C |
|
Vibration |
Random, 2 g, 5 to 500 Hz |
|
Safety |
EN 61010-1:1992 |
|
Protection Class |
Pollution Degree II |
|
Protection Class（L*W*H） |
224mm*172mm*65mm |
|
Weight |
About 1.2kG(Include the battery that accessory) |
DC Voltage Measurement
|
Range |
Resolution |
Accuracy |
|
0-30.000V（upper display）*1 |
0.001V |
0.02%+3 |
|
0-24.000V（lower display）*2 |
0.001V |
0.02%+3 |
|
0-90.000mV *3 |
0.001mV |
0.01%+10 |
|
* 1: The signal from the V / mA, COM jack input, * 2 and * 3: The signal from the VΩRTD, COM jack input. * 1 and * 2: The input impedance higher than 1MΩ. |
||
DC Voltage output
|
Range |
Resolution |
Accuracy |
|
0—20.000V |
0.001V |
0.02%+3 |
|
0—90.000mV |
0.001mV |
0.01%+10 |
|
The signal from the VΩ RTD、COM jack output. Maximum load: 1mA. |
||
Millivolt measurement and output
|
Range |
Resolution |
Accuracy |
|
-10.000mV—80.000mV |
0.001mV |
0.01%+10 |
|
The maximum input voltage: 30V.
|
||
DC Current (Milliampere) Measurement
|
Range |
resolution |
Accuracy |
|
0—24.000mA（upper display）*1 |
0.001mA |
0.02%+4 |
|
0—24.000mA（lower display）*2 |
0.001mA |
0.02%+4 |
|
* 2:Press the gray button to select this function. Signal from the mA-/4W, mA + / 3W jack input. For Measurement, the sampling resistance: 10Ω. |
||
DC Current (Milliampere) Output
|
Range |
Resolution |
Accuracy |
|
0—24.000mA |
0.001mA |
0.02%+4 |
|
SIMU (Simulating) output current, the external voltage higher than 12V, lower than 28V. SOUR (Sourcing) output current, the signal drive capability: 1000Ω at 20mA.
Press the gray button to select the this functions. Signal through to mA-/4W, mA + / 3W jacks. |
||
Ohms Measurement
|
OhmsRange |
Accuracy ±Ω |
|
|
4-wire（4W） |
2-wire（2W）and 3-wire（3W） |
|
|
0—400.00Ω |
0.1Ω |
0.15Ω |
|
400.0—4000.0Ω |
0.5Ω |
1Ω |
|
Excitation Current: 0.2mA.Maximum input voltage: 30V.2-wire: Does not include lead resistance. 3-wire: Assumes matched leads with a total resistance not exceeding 100 Ω. |
||
Ohms Source
|
Range |
Excitation Current from Measurement Device |
Accuracy ±Ω |
Resolution |
|
5.00Ω to 400.00Ω |
0.15mA-0.5mA |
0.1Ω |
0.01Ω |
|
5.00Ω to 400.00Ω |
0.5mA-2mA |
0.05Ω |
0.01Ω |
|
400.0 to 1500.0Ω |
0.05mA-0.8mA |
0.5Ω |
0.1Ω |
|
1500.0Ω to 4000.0Ω |
0.05mA-0.4mA |
1Ω |
0.1Ω |
Temperature ,Thermocouples
|
Type |
Range |
Resolution |
Measurement and Source Accuracy±℃ |
|
S
|
-50.0℃to 0℃ |
0.1℃/0.1℉ |
1.5℃ |
|
0℃to 500.0℃ |
0.1℃/0.1℉ |
1℃ |
|
|
500.0℃to 1760.0℃ |
0.1℃/0.1℉ |
0.8℃ |
|
|
R
|
-50.0℃to 0℃ |
0.1℃/0.1℉ |
1.5℃ |
|
0℃to 500.0℃ |
0.1℃/0.1℉ |
1℃ |
|
|
500.0℃to 1760.0℃ |
0.1℃/0.1℉ |
0.8℃ |
|
|
B
|
200℃to 800℃ 800℃to 1800℃ |
1℃/1℉ |
2.2℃ 1.8℃ |
|
K |
-200.0℃to 1370.0℃ |
0.1℃/0.1℉ |
0.8℃ |
|
N |
-200.0℃to 1300.0℃ |
0.1℃/0.1℉ |
0.8℃ |
|
E |
-200.0℃to 1000.0℃ |
0.1℃/0.1℉ |
0.5℃ |
|
J |
-200.0℃to 1200.0℃ |
0.1℃/0.1℉ |
0.5℃ |
|
T |
-200.0℃to 400.0℃ |
0.1℃/0.1℉ |
0.5℃ |
|
The thermocouple complies with ITS-90. If open the cold junction compensation (CJC ON), additional plus ± 0.3 ℃. |
|||
Temperature ,Resistance Temperature Detectors (RTD)
|
Type |
Range |
Accuracy±℃ |
||
|
Measure 4-wire℃ |
Measure 2-wire and 3-wire℃ |
Output℃ |
||
|
Pt100-385 |
-200.0℃-850.0℃ |
0.3℃ |
0.5℃ |
0.3℃ |
|
Pt100-3926 |
-200.0℃-850.0℃ |
0.3℃ |
0.5℃ |
0.3℃ |
|
Pt100-JIS |
-200.0℃-850.0℃ |
0.3℃ |
0.5℃ |
0.3℃ |
|
Pt200-385 |
-200.0℃-250.0℃ |
0.2℃ |
0.3℃ |
0.2℃ |
|
250.0℃-630.0℃ |
0.8℃ |
1.6℃ |
0.8℃ |
|
|
Pt500-385 |
-200.0℃-500.0℃ |
0.3℃ |
0.6℃ |
0.3℃ |
|
500.0℃—630.0℃ |
0.4℃ |
0.9℃ |
0.4℃ |
|
|
Pt1000-385 |
-200.0℃-100.0℃ |
0.2℃ |
0.2℃ |
0.3℃ |
|
100.0℃-630.0℃ |
0.2℃ |
0.3℃ |
0.3℃ |
|
|
Cu100 |
-50.0℃-150.0℃ |
0.4℃ |
0.6℃ |
0.4℃ |
|
Cu50 |
-50.0℃-150.0℃ |
0.4℃ |
0.6℃ |
0.4℃ |
|
Resolution: 0.1 ° C, 0.1 ° F. Allowable excitation current (Source): Pt100-385, Pt100-392, Pt100-JIS, Pt200-385: 0.15 to 3.0 mA Pt500-385: 0.05 to 0.80mA; Pt1000-385: 0.05 to 0.40mA. * 2-wire: Does not include lead resistance. *3-wire: Assumes matched leads with a total resistance not exceeding 100 Ω. |
||||
Accessories:
The items listed below are included within the packaging aluminum box.
the Calibrator is damaged or missing something, contact with the supplier immediately. Contact to the supplier to order replacement parts or spare parts please.
①. Test Leads 1 pair
②.A pair of alligator clips test lead. 1 pair
③. Power Adapter 1
④. Ni-MH rechargeable battery 1.2V AA 8
⑤.Spare fuse 3
⑥.User manual 1
Remind:
Do not operate the Calibrator around explosive gas, vapor or dust. Do not make the Calibrator be exposed to Glare and high temperature or moisture.
Do not operate the Calibrator around explosive gas, vapor or dust. Do not make the Calibrator be exposed to Glare and high temperature or moisture.
.
Warranty: One Year.
Any quality problem occurs whitin 7 days after you receive the goods,you can ask for replacement or refund as long as it is not damaged by personal mistake.
Shippment&Payment:
We usually shipped by air,such as DHL,UPS,FedEx,China post mail,EMS,TNT and etc as you like,shipping day is about 4 days or more depends on your order quantity, and the delivery day is about 20-40 days by EMS and post mail,by others it is within 20 days. We usually write gift on the packing with a low value to help you reduce the tax,however different countries have different rules, if you refuse to pay the tax at your country,the goods will be returned to us,you have to bear the loss.
As to payment, you can pay by T/T and western union as you like, we will ship the goods only after we get your full payment.
Member Information
| Shenzhen Huayi Technology Co. Ltd | |
|---|---|
| Country/Region: | Guang Dong - China |
| Business Nature: | Manufacturer |
| Phone: | 13872175283 |
| Contact: | Alina Lee (Sales Manager) |
| Last Online: | 28 Dec, 2015 |