JS Series Twin shaft concrete mixer
RP concreter mixer JS based on the advantage of driving steady and convenient installation, this key concrete equipment is widely used in the small and medium-sized construction and mainly used for a variety of supporting the host and application in the coal slurry mixing of concrete production line and waste solidification processing, and other industries.
Feature of JS Series Twin shaft concrete mixer
1 Mixing tank:.. The cylinder cross-section for the inverted "Ω"-shaped Adopting the overall annealing process to deal with the cylinder welding to prevent stress and deformation after welding; Its scale-board and leaf are made from wear-resistant alloy cast iron, and it is of well-structured and long service life;
2. The mixing arms are set in the location of "45 degrees", "60 degrees", "90 degrees" to achieve a ; full mixing of materials;
3 Lubrication system:. Adopting shaft sealing structure and the automatic lubrication system to
reduce grease lubricant consumption cost as well as its impact on the concrete
performance; Can choose the different forms of oiling: continuous oiling, intermittent
oiling and manual oiling.
. 4 Transmission system: cycloid-type transmission and shaft-mounted transmission structure;
5 Shaft sealing structure:. Its inner layer is labyrinth seal, which is made of special wear-resistant material, the middle layer is a number of special rubber rings and the pressurized oil protection, the outer layer has a floating seal ring with a rubber ring to prevent the plasma leakage; With 100 mm isolation zone between the bearing seat and shaft sealing area to completely isolate the leakage of concrete slurry from the bearing, and thus to extend the service life of the critical parts.