~It is used to fabricate various types of rain gutters and relief grooves of plastic doors and windows.

Upper and lower milling heads are set for the machining requirements of different profiles.

It clamps the work piece at on one motion and completes the machining of gutter holes at two directions automatically.

It adapts itself to a wide range, as it makes continuous adjustment to the milled gutters within the range of 60mm.

Parameters:
Input Power 2/3/4*0.38kw
Power Supply 220V/Hz
Working Pressure 0.5~0.8MPa
Motor RPM 25000
Gas Consumption 30L/min
Diameter of Milling Cutter 4, 5
Grooving Depth 30mm
Groove length 30~60mm
Dimensions 1600*880*1650
Weight 140kg