GuangLi Spray Booth
--Wall panel: sandwich style, δ=50mm,rock wool available as required.
--Basement: steel structure, full grids,ramp: 2 pcs of grids.
--Door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock.
--One unit of 11kw intake fan and one unit of 11kw exhaust fan .
--Water soluble paint with hot-air acceleration system: 1set
--4m straight exhaust ducts, one 90° bend, and one 60° bend.Intake duct :4m straight exhaust ducts,
one 90° bend, and one 60°.5m straight chimney and 2 small bends.
--1 manual VCD exhaust/intake damper, electrical VCD as optional. one pressure meter.
--Spraying/baking transition damper, automatically air controlled.
--Heat exchanger: stainless steel. RIELLO/ RG5S burner.
--Roof filter: 6 pcs of filter, mounted above support frame, which is made of steel and powder coated.

--Control box: imported components, overload, overheat,
phase-lacking, phase-lacking protection, engine Y/ start. .
--Automatically stop when preset time is up.--Constant temperature spraying.

Parameter
External size(m) 7.0x5.6x4.0
Internal size(m) 6.9x3.9x2.7
Door width (m) 3.0
Door height (m) 2.66
Air flow (m3/h) 30000
Inside on-load air speed(m/s) 0.3-0.5
Power (kw) 26
Vehicle suited Saloon car