save the steam about 20% by a controling system, with the different pressure from 3sections cylinders.

According to clients' paper-making system, our professional team work out the suitable method to save steam. It can save around15%- 20%. Some old paper-making machines can be saved near to 30%.

During the 3section control system,the condensed water with high pressure wil get into the flash tank directly, instead of the water recovery system. Then, after flashing tank, the steam will be used for next section.  After the 3rd section, the temperature of the condensed water will be lower than 90C.

Normally the average pressure of the steam is 0.24mpa, the enthalpy value is 2714.5Kj/Kg, Latent heat of vaporization is 2184.9Kj/Kg. Under this pressure, the condensed water is 126C, the enthalpy value is 529.63Kj/Kg. The tranditional steam trap is mainly used to stop steam and unblock water. It is with pulse mode to paroxysmal drainage. There will be 5%steam leaks, sometimes 20%.

Our system including the Orifice Plate steam trap, Flash tank, Condensate water tank, Control valve, Pressure transmitter, Differential pressure controller, Level transmitter, Siemens PLC MCU, Standard fild control, AC linde-conditioner,etc.

We sincerely hope clients can contact us for more details. With our design, you can be assured to save steam with satisfication.

Look forward to cooperate with you.

Best regards,

Mia