GM Tech2 GM Scanner -CANdi & TIS

   
The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2013

Descriptions for GM Tech-2 PRO Kit With CANDI Interface
 
If you order this item, we can provide you a card (32 MB PCMCIA Card) with any one of these following softwares,please choose the software you want when you place the order:
 
Notice: TIS together with this unit is Offline TIS,offline TIS is free,can program GM and Opel cars only till  2008. we will offer clear instructions and the cracked file. 

1. GM-2014 V33.04 software
2. OPEL-2013 V151.001 software
3. SAAB-2012 V148 software
4. SUZUKI -2010 V01.210.020 software
5. ISUZU-2010 V107.021 software
6. Holden Export-2013 software
7. Australia Honlden-2013 software
 
Software version and Language for reference you can download the list from here: Download

Please note in your order the software and software language of your choice.  Or you can contact our customer service.
GM Tech2 GM Scanner -CANdi & TIS software list

Features
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
 
Vetronix Tech-2 Specifications
Dimensions: 12"
Microprocessor: 32 bit, 16 MHz.
Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
Communications: Integral RS232 communication port.
Screen: 3.8" backlit monochrome with full graphics.
Capability: 320 40 pixels. Displays up to 9 vehicle parameters at once.
 
Tech 2 Kit Includes
1.    Tech 2 Flash Tester
2.    32 MB PCMCIA Card with GM OE Applications
3.    Data/Sensor/Trouble Code Manual
4.    DLC Cable, DLC Loopback Adapter
5.    12V Cigarette Lighter Power Cable
6.    SAE 16/19 Adapter
7.    NAO 12/19 Adapter
8.    Candi Module
9.    Battery Power Cable
10.  Storage Case 
11. DVD （Electronic Documentation V13.0 and TIS 2000）
  
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
 
All products with one year warranty that you purchased from Autosky company(note: if you damaged the machine by yourself or it is damaged due to you drop the products on the undergrand, this condition is not in warranty, but we also will repair products for you, we only take cost of accessories, and PLZ send back the products only by post office, and write it as gift, the value is under USD50, thanks)
PLZ contact our sales in time if you meet any problem with our products when you got it in your hand, we will take action in time for solving it!