Machine group.

Turbine model GF30

The engine manufacturer Guangxi Yuchai Machinery Limited by Share Ltd

Engine type 2115ZD

The generator manufacturer Shanghai qianghui Generator Co. Ltd.

The generator model UCI 224D

Rated power 30KW

Maximum power 36KW

Rated voltage 400V/230V

Rated frequency speed 50Hz/1500rpm

Power factor 0.8 lag

Mechanical / electronic deb ing deb ing deb ing

Open type size 1900 x 700 x 1350 (mm)

Open type weight 800KG

Mute type size 2350 x 1000 x 1250 (mm)

Mute type weight 1100KG

Launch the machine parameters

Yuchai engine brand

Engine type 2115ZD

Cylinder type inline 4 cylinder, 4 stroke

Bore and stroke of 108 x 115 (mm)

Suction style naturally aspirated

Rated speed 1500rpm

18:1 compression ratio

Output 0.42L

Maximum power 36KW

Water cooling

Deb ing stability is 5%

Start DC24V

Electric machine parameters

Standford brand Foshan generator

Rated power 30KW

Rated voltage of 400V/230V

Rated frequency speed 50Hz/1500rpm

Self excited excitation mode

Voltage adjustment range ≥ 5%

Voltage fluctuation range ≤ ± 5%

The insulation class H

Protection class IP23

Machine group electrical properties

Stable voltage regulation rate ≤ 2.5%

Transient voltage regulation rate ≤ (-15 ~ +20)%

Voltage stability time ≤ 1S

Voltage fluctuation rate ≤ 0.5%

Steady state frequency adjustment rate ≤ 10%

Transient voltage adjustment rate ≤ (-7 ~ +10)%

Frequency recovery time ≤ 3S

Rated power of 1>

Set in this load following, every 12 hours to allow more than 10% of this value under load 1 hours of operation.

2> standby power

Units under varying load, maximum load shall not exceed this value..

3> voltage fluctuation

In 0.5% the following power factor in 0.8 ~ 1 between any of the following circumstances voltage fluctuation; from no load to full load, working unit operating load at arbitrary stable speed below 4.5%.

4> frequency / speed fluctuation rate

From no load to full load, frequency / speed decreased in the following areas: ≤ 5% from 25% load to full load,working unit operating load at arbitrary stability, frequency / speed fluctuation rate below 0.25%.

5> use environmental conditions

Pull height: ≤ 2000m environment temperature: -12 ℃ xT ≤ 40 ℃ and humidity: ≤ 60% ground tilt: ≤ 30 º