Adopt Novel and unique row design, Break traditional cabinet design. Traditional cabinet 

has separated frame(each cabinet have one set frame). LP combined row cabinet share the 

same frame with neighbor cabinets. that means a cabinet-unit is made up of two set frame 

and four mounting angles. and you can combine multiple unit cabinets together. LP combined 

row cabinet not only decrease the cost of cabinets but also enlarge the cabinet's inner 

space.

Feature and Technical Parameter:
1.comply with ANSI/EIA;RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-95 

Standard, Compatible with 19inch international standard metric system and ETSI standard.
2.Frame is welding by typical profile and connector. Mounting profile is welding by double 

profile and connector. Reliable structure, Static loading capacity:1200KGS.
3.High density vented front door and rear door are produced by high density precise 

accurate punching technology. Minimum distance between holes is 0.75MM. Hole diameter is 

5MM. High densite vented front and rear door make the vented area reach 75% to 80%. It is 

the best solution for radiating problems.
4.The front door and rear door can choose flat, Arc,Waved,Arch type.
5.Exterior door hinge with 180degrees, The door can be opened to 180 degree though 

connected, easily assembled and operated.
6.The side panel can be installed and uninstalled quickly which make working conveniently. 

whole or double section side panels as optional.
7. We can manufacture the cabinet according to customer's special requirements.
8. Combined Cabinet suitable for multiple cabinet projects and assembled on spot, it can not be used for single cabinet. combined design maked transportation convenient.

Surface treatment:
Degresing,phosphating, powder coating.
Material:
The frame is Aluminum,the others are Cold rolled steel
The thickness of 19inch bar is 2.0MM,the others are 1.2MM~1.5MM.
Color:
Body color:RAL 9004(black) RAL 7035(grey)