PRESSURIZED SOLAR WATER HEATER FEATURE:
1. Adopts the best conduction performance metal- heat pipe (copper)
2. Can be used all year round in the cold climate
3. High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly
4. The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa
5. No water in the tube, one tube broken don't influence the system working
6. The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage
7. Dual-purpose brackets for both flat and inclined roof
8. The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out
Specification & Material
Commodity Integrative Pressurized Solar Water Heater
Inner tank SUS304-2B with thickness 1.2mm- 310mm
Outer tank Galvanized steel alloy with thickness 0.4mm/S. S-420mm
Bracket Galvanized steel alloy with thickness 1.6mm
Heat insulation layer Imported polyurethane(PU) 50mm
Tube 58mm*1600mm solar vacuum tube with copper heat pipe
Cold resistance: -30
Tube Hail Resistance ≤ 25mm
Certificate CE, ISO9001: 2008, CCC