Advantages

1 connecting pieces of plates after soldering,   pcb board or electronic component are often broken when break the board , This machine separates the board by moving the cutting tool, can drastically reduce stress, prevent fracture of the welding spot and electronic component cracking and breaking, improve production efficiency and quality.

2.With upper circular knife and bottom straight knife, place the pcb board on the straight knife, push on the pedal, upper circular knife transverse walk to the set point , the aluminum substrate was segmented perfectly with a neat slice ,and  without burr.

Features

Completely independent development, using microcomputer control, fixed-point precision, strong stability. Cut 0-460MM long single board in one time.

Cutting plate speed can be adjustable with high or low speed , rate of 500mm/S and 300mm/S

The knife wheel feed distance: 0-460mm. The height of knife wheel can adjust: 0-2mm in order to apply to the thickness of all kinds of aluminum substrate , solving the depth problem of aluminum substrate V-CUT groove . Operation platform height can be adjusted: 0-50mm.

The forward and stop point of knife stroke can be set according to the length of the board. stop point was set by manual.

The tailgate depth: 0-150mm. The maximum plate cutting width: 150mm, maximum plate cutting length: 400mm,maximum board thickness: 0.2-3.2mm, the maximum thickness of V channel: 0.25-2.0mm.

Upper and botton knife are imported high-speed steel material, it is very durable ,it can be re grinded when the knife is not sharp.

Technical specifications

Power : 220VAC/110VAC

Dimension：L1200*W521*H410mm

Weight ：60Kg

Thickness: 0.8-3.5mm

Blade material ：SHK-9 Imported high speed steel

Speed：0-1000mm/s