Specifications

The function of KEYU plastic float valve is to stop the inflow of water supply when a certain desired water level is reached.

About Self lock valve(Autolock valve):

 

   The self lock valve is a new type float valve, there is a control hole on the float valve besides the outlet hole, so there is two hole of the self lock valve to control the water flow. The function of control hole is to control the flow of water , then make the pressure to the seals rubber of the outlet hole , finally the valve been closed by the water pressure. The advantage of this valve is that the control hole only control the flow of water, not close the water, so the control hole is very small. but the outlet seals hole is very big, so the self lock valve have a big flow rate than the strong lock valve.

 

 

 

Features

1. Easy Installation and Maintenance
2. Accurate Water Level Control
3. Good Performance:

• Quiet
• Stability
• Quick stop
• Long lifetime
• Non-polluting
• Less abrasion
• Corrosion-resistant
• Quick water flow rate

 

Other products you may be like

 

 

 

       

 

 

 

 

Technical Parameters

Mode	2" plastic float valve DN50CL
Install Size	342.30mm(Maximum)
Thread	2" Inch
Body Material	ABS(Acrylonitrile Butadiene Styrene plastic)
Float Ball Material	PE(Polyethylene)
Seals Material	SR(Silicon Rubber)
Working Pressure	0.01- 1.2Mpa(0.1Mpa=1Bar=14.5Psi)
Working Temperature	0-70°C

 

 

Flow rate figure

 

 

 

CAD documents

 

 

Application place

The actual application depends on the specific circumstances

DN50CL plastic float valve can be installed in water tank, PE tank, gardening, water tower, cooling tower, irrigation, livestock, etc.

 

 

 

Installation

Loose the screw on the arm to adjust the float position and achieve the horizontal and vertical installation. Each of install method will not affect the performance.

 

 

 

 

 

Tips

 

 

 

1.If the body and pipe joint leak water, please check water tape is wrapped and the pipe joint is tighted.

 

2.The Strength should suitable when tight and fix the float valve, too much excessive strength will damage the valve.

 

3.Please check the water inlet filter regularly and remove the garbage out in time.

 

4.Please do not use the cleanser which will cause damage when clean the float valve.

 

Why us

Eight years export experience

Over 50 models of different float valves to choose

Our float valves have a variety of patent protection

Supply float valves to more than 500 clients overseas

The professional manufacturer water tank plastic float valve

 

Other service

Supporting OEM and ODM service

High temperature ,material requests, strong acid and alkali custom service.