Electronic Acupuncture Treatment Instrument( Nerve and Muscle Stimulator) is combined modern micro computer technique with traditional Chinese Medicine Acupuncture ad meridian Theory, based on the traditional SDZ series of electronic acupuncture treatment instrument. The device is used for applying low frequency pulse to stimulate the points of human body, may be used to apply an electrical current to electrodes on a patient's skin to treat pain. This device doesn't include acupuncture needles, combining with acupuncture needles in use.

 

 

Main Functions: 

 

♦ Replacement of hand massage

♦ Acupuncture therapy

♦ Six route output

♦ Multi-pulse wave frequency LCD                              

♦ Auto-timing Switch

♦ Battery for operation

 

Main Specifications:

 

 

Specifications	500 ohm test load
Output channels	6 channels
Pulse shape	asymmetric biphasic triangular pulse wave
Pulse width	0.175 ms ± 30%
Voltage, max	less than 80 volts
Pulse Frequency
Continuous	1 to 100 Hz
Intermittent	1 to 100 Hz, interval time between groups is 5 sec
Dense	5 to 100 Hz
Distant-dense	One-fifth of the Dense Wave frequency, duration of distant
Duration of wave
Distant-dense	5 seconds
Dense	10 seconds
Continuous	15 seconds
Power source	6 standard 1.5 volt C batteries, AC adapter
Size, color, weight	10.25" x 7" x 2.5", beige, 1.9 lbs.

 

Main Features:

♦ Six (6) output channels 
♦ New IC circuitry, no cross over, no interference. 
♦ Continuous, intermittent, and dense-disperse (modulated) wave forms 
♦ Adjustable frequency : 1 ~ 100 Hz 
♦ Durable alligator clip wires 
♦ Timer 0 ~ 60 minutes 
♦ Output safety alert - all outputs must be turned off before power on the unit. 

 

Technical Specifications:

♦ Output Pulse Road:6 Channels outputs

♦ Output Pulse Wave:un-symmetry two-direction pulse wave

♦ Output Pulse frequency: 1 ~ 100 Hz continuously adjustable

♦ Output Current:≤ 50 mA(Load 500Ω)

♦ Output Pulse width:0.20ms

♦ Input Power:5.0VA(including AC Adapter)

♦ Power Source : DC 9V (CR14, UM2), or AC adaptor

♦ Intermittent wave : continuous wave

♦ Frequency adjustable in 1~100 Hz, break-wave time is 5 seconds, continuous 
♦ machine Dimensions :260 x 190 x 110 (mm) 

♦  One pc Weight :1 kg(main machine)

 

Accessories:

 

 

 

output electrode wires	6pcs
self-adhesive electrode (size:50mm*50mm)	6pairs
User Manual ( Chinese-Englsih)	1pcs
certificate of product quality conformity	1pcs
foam box against shock	1pcs
110V AC/DC Adapter	1 unit
Filiform needle-electrode         (Metal Clamps), ( size: < or = 28mm)	6 pairs