BLG80w
       The power supply is equipped with a zero current half-bridge soft switching circuit to provide high efficiency and response speed. It is easily compatible with laser tubes of various manufacturers.
With a simple port control, it is applicable to high-level and low-level signals and can start and stop laser by using TTL level. In addition, it is equipped with an abnormal protection switch to detect whether there are external water and air.
0 to 5V analog signals or PWM signals can be inputted to adjust laser power size.
Open protection: The power supply can work in the open-circuit state within a short time under the condition of good protection grounding, this preventing laser power supply damage caused by laser tube burst.
Ex-factory Aging Test:
       Each power supply is subject to 12h aging test under the condition of full load and 60°C high temperature and 500-time 7s start-stop test.

Main Technical Parameters