|
Electrical connection:
| |
 |
|
|
|
Remark:
- 1),This product should be installed by trained electricians.
- 2),Check integrality of the products when unpack the packing.
- 3),The distance between the light and any flammable materials must not be less than 0.2m. The distance between the upper part of the installed light and the ceiling must not be less than 2 cm.The light must not be installed into ceilings or walls that contain heat-insulating material.
- 4),The main cable must not connect with the low voltage cable or the surface-mounted lights.
- 5),Guide the lights' connecting cables through the drilled-out hole,and fix the surface-mounted lights with the pre-fitted clips. Make sure that these are securely connected to the base material.
- 6),When laying the cables, make sure that the cables and plugs are not subjected to any tensileor twisting forces. Fit the cable tension relieving mechanisms to the connection points of thesurface-mounted lights. Do not kink cables. Output cables should be laid separately and at a distance from other cables.
- 7),After installation, connect the transformer to the mains supply.
|
|
