T8 motion sensor led tube  Description

• 1. Use led tube with IR SENSOR in the car park. when no cars move in the range of induction, all of the infrared inductive led tube are dormant, each tube power consumption 3W,
• which can meet the requirement of security monitoring lighting ,and the great limit to save the electricity.(According to the previous experience, it can save up to 90% electricity in 24 hours.)
• 2. Infrared sensor, will turn on light to 100% automatically then after duration time or no infrared spectrum been detected, will turn down load automatically, High sensitivity, Strong reliability.
• 3. With thermal infrared detection sensor technology, Combine LED lamps with Infrared sensor, easy to install, energy-saving and high efficiency.
• 4. While cars or person left the inductive area 30~40 seconds later it will be at 2.5W or customized a djusting.

T8 Led Sensor Tube  Installation

• 1.Standard installation: Connect directly to AC power, this is the most energy saving model
• 2.Repalcing installation: If there’s a starter on the old fluorescent light fixture, remove the starter
• 3.Remove electronic ballast: If there’s no starter on the fluorescent light fixture, remove the electronics ballast
   

T8 led tube lamp  Features

• 1. Efficiency:Small heat,90% of the electric energy into visible light,ordinary incandescent light 80% of the electricity into heat,only 20% of the electrical energy into.
• 2. Special circuit design, each LED works separately, avoiding the single broken LED influence.
• 3. Professional thermal design, using high-quality aluminum alloy heat radiating material,anti-impact.
• 4. Built-in high efficiency constant current driver, Wide Voltage AC85-265V 50/60Hz input, worldwide application.
• 5. Insolated driver(chosen), NO RF interference, and electric wave resistant.
• 6. Long lifespan 50000 hours for 6-8 years (12hours per day), it is about 10 times of traditional fluorescent lamp.
• 7. Strict quality control, 72hrs aging test and complete inspection before shipping.8.LED Light Tube with CE, ROHS& FCC,PSE approvals and 3-5 years warranty.
• 9. Quick and easy installation, be directly placed in traditional T8 or T10 fluorescent brackets.
• 10. Energy Saving t8 led motion sensor tube light  

Application For 18w t8 motion sensor led tube:

•  Auditorium walkway, stairway, border or contour lighting, channel letter lighting, emergency&security lighting,furniture lighting.House, hotel, office, exhibition, shop, living room,Bedroom, kitchen, washroom, showcase, supermarket,department store,Residential, institution buildings, factories, schools, colleges&universities, hospitals,plant, warehouse.