Hammer crusher owns the impact rotor with a special ring hammer. When the material enters 

into the hammer crusher, it can be crushed by the ring hammer which is revolved the 

kinetic energy and rushed at the impact plate receiving the second crushing process, then 

falls on the screen sieve and be cut, extruded, and grinded by the ring hammer. At lase 

the material up to the standard can be discharged by the machine. Uncrushable material 

enters into the metal collector and should be eliminated regularly.Hammer Crusher: 

http://www.ms-machinery.com/product/hammer-crusher.html
Features of hammer crusher:
1. Big reduction ratio: maximum feeding size is 1.3-1.5m; 3-150mm of discharging size.
2. High fineness of discharged particles: favorable shape with aggregate, the powdery 

material is no more than 20%.
3. Simple production process: the two or three stage crushing is reduced into single 

stage.
4. Economical: small capacity of matched motor, which greatly reduces the production cost.
Hammer crusher by MS: MS have many years of experience in production of hammer crusher. 
Jaw Crusher: http://www.ms-machinery.com/product/jaw-crusher.html
We can provide PCH Series Ring Hammer Crusher and others. PCH Series Ring Hammer Crusher 

is used to crush cool, especially brittle materials, like gangue, coke, slag, red 

sandstone, shale, loose limestone, etc. The compressive strength of the material does not 

surpass 100Mpa; the surface water no more than 15%. Email Adress:info@ms-machinery.com