Liquid Silicone is names as two part liquid silicone that vulcanizes at room temperature . 

Part A is a flowable liquid , part B is the curing agent .

Applications

liquid  silicone could be mainly used for making concrete

Stones mold , jewelry mold , statue mold, artificial craft mold,culcutre stone, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making,prototyping etc.

 

Advantage

* low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1)

*good fluidity easy for pouring operation ( in round 10000 cps )

 

Operation instruction of HY-E Series molding silicone:

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

 

SHELF LIFE:8-10 months when stored under 24°C in original unopened packages.

PACKAGE: Packed in 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.

 

For more information, pls feel free to contact Ms Hebbe

office no. :0086-755-89212380

Mob: 0086-18938861889

Email: hyje(at)szrl(dot)net