IEC60695 UL746A test equipment needle flame tester

Model:	AUTO-ZYA
Brand:	AUTOSTRONG
Origin:	Made In China
Category:	Industrial Supplies / Electrical & Electronic Product Equipment
Label:	needle flame tester , test equipment , flammablility tester
Price:	US $3500 / set
Min. Order:	1 set

Product Description

Introduction

Needle Flame Tester reference to IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005..
AUTO Needle Flame Tester used for lighting, low voltage electric appliance, household appliances, electric machine, motor, electric tools, electronic instrument, electrical instrument, electrical connector such as electrical and electronic equipment and parts, components of research, production and quality inspection department, also suitable for insulation materials, engineering plastics
AUTO Needle Flame Tester with predetermined size (Φ 0.9 mm) needle burner, in 45 °angle burning product,measure the fire risk by product light-off or holde burning time

Needle Flame Tester Technical parameters:

Needle burner	inner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel
Burner angle	0,°20°, 45° (adjust flame height)
Thermocouple	Ø0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C
Burning time	0-999.9 s ± 0.1 s adjustable (usually selected for 30s)
Hold Burning time	0-999.9 s ± 0.1 s, automatic recording, manual time-out
Flame Height	12mm ± 1mm (with height measurement instruments)
Flame Gas	butane gas/Butane gas, min. 95% purity (can use bottled lighter gases)
Temperature Test Range	0~1000°C
Flame Temperature Requirements	from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds
Standard Copper Block	4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP
Test process	automatic control, independent convulsions
Chamber	≥0.5m3
Control	Using single chip microcomputer + touch screen control
Consult standard	GB/T5169.10-2006 , IEC60695-11-5:2000,UL746A
Power Supply	800VA ,220V, 48-60Hz
Display panel language	English(customize available)