IEC60884 Plug and socket tester

Plugs and the sockets life tester is designed according to the IEC884. 
Used to detect the mechanical life test.

Plugs and the sockets life tester is designed according to the corresponding provisions of the GB2099-96,GB16915-97 and IEC884-1,used to detect the mechanical life test of the household and similar purposes of the plugs and the sockets products.

This tester is link with the power load counter, can use to test the electric life of the plugs and the sockets, the normal operation and the breaking capacity experiment.

Some fixture may increase according to the customers’ requirements, on the wall switches, plate switches, pull switches, allocated plate switch, inverted plate switch and self-test button to go on the detect.  

Technical characteristics

1. Power supply is AC 220V /2A/50HZ  

2. Gas source is 4~6kg/cm2 

3. The put through time, can adjustable from 0 to 99.9s (min)

4. Experimental cycle time, can adjust from 0 to 99s.

5. Counter, can preset from 0 to 999999

6. Station There are two stations (can choose the station number)

7. The appearance size is 640×350×330mm