Brand: "South Pump "brand
Model No: FZB Series
It is designed and manufactured depanding on international standard and conbine Non-metal Pump. Pump body are metal inserts covered by fluoroplastic lining, The whole over-current components are manufactured by fluoroplastic alloy. The pump cover and impellers are overall fired- pressed by metal covered by fluoroplastic outside. The shaft seal use externally mounted advanced bellows mechanical seal. Stator ring(a part of mechanical seal ) is made of alumina ceramics (or Silicon carbide ) 99.9%, Rotor ring is filled with PTFE Materials, so it is has an strongly corrosio-rsistant, wear resistance and good tightness. Inlet and outlet of pump are strengthened by cast iron to increase the pressure resistance.
After the acutally application usage, we find that this pump has a lot of advantages, including corrosion-resistant, wear-resistant, high temperature resistant, non-aging, mechanical strength, smooth operation, advanced and reasonable structure, good tightness and easily to remove and maintain, long life. etc...
Products Structure:
Usage: FZB Fluoro plastic centrifugal pump is self-priming, you just need one time to fill liquid in pump when used for the first time. It is not neccessarily to fill liquid when you use it again. So it can reduce workload.
It is widely used in transmitting strongly corrosion mediums, chemical, pesticides, acid and alkali manufacturering, paper-making, electronic, waste water treatment. The self-priming height depending on medium density between 2 m to 4 m. It is the best choose to replace heavy underwater pump.
Working temperature: -20 ~150 degree
Flow: 8m3/h~1000m3/h
Head: 15m~45m
Motor: 2.2kw-30kw
If you have any comment, please let us to know.