SBM Low Price Easy Handling Efficient Hammer Crusher

Hammer Crusher Product Introduction

Hammer Crusher is used for grinding the medium-hard and low-abrasive materials with their pressure resistance strength blow 100Mpa, and humidity lower than 18%. And these materials include the coal, salt, plaster, tile, limestone and so on.

Hammer Crusher Working Principle

The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers.

1. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are crushed to small sizes by the high-speed hammer, with the process of pressing, impacting, cutting and grinding.

2. There is a screening plate under the rotor, which make sure the materials with size smaller than the screen mesh will be screened out and others will be left to be further hammered and ground until they fulfill the standard size.

3. The size of the final products can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirements.

Hammer Crusher Structure Features

1. High production and high crushing ratio.

2. Low power consumption, homogeneous particle size.

3. Simple, compact and light mechanical structure.

4. Low investment cost, easy management.

5. CE&ISO

Hammer Crusher Technical Data