1. Function features of resistance spot welding machine :

 

1). This kind resistance spot welding machine is our latest developed reinforcing mesh welding machine.

 

2). The line wire and the weft wire are pre-straight and pre-cut. The line wire is feeding by theservo motor, pulling the wire net by the servo motor automatically.

 

3). The welding power comes from the spring. It is easy to control the welding pressure.

 

4). The weft wire feeding from the multi hopper which capacity is 1.5t, more over ten times than the traditional hopper.

 

5). The new machine added the bear wire net and carries equipment that makes the working

more convenience. The welding part is used the springiness input wire trunking that makes

the welding copper use for long time.

 

6). 125KVA Transformer with water cooling system and separately welding controller.

 

7). This exporter welding machine rebar mesh production line adopts synchronous control technique.

The center-control and welding time are composed of PLC program system.

The input front-panel is touch screen, the operation is more intelligent and reasonable.

 

2. Main technical parameters of resistance spot welding machine : 

 

 

resistance spot welding machine  Main parameter 

 

 

 

Model:	GWC-2500E	GWC-3000E
Diameter	3-8mm	3-8mm
Mesh Width	2500mm	3000mm
Electrode Number	48	30
Transformer	8*125KVA	10*125KVA
Voltage	380V, 50HZ,3 phase(customized)
Line Wire Distance	50~200mm
Cross Wire Distance	50~200mm
Max length of wire mesh	6m (customized)
Welding speed	0-50times/min
Line wire and cross wire form	Pre-straightened and pre-cut
Feeding hopper capacity	1.5T
Welding voltage	Welding voltage can be adjusted through the button on the front plate when welding different wire diameter
Material	low carbon steel wire, galvanized wire,rolled ribbed steel wire, cold or hot rolled round steel wire.