PP Pleated Filter Cartridge
General  Description
The PP Pleated Filter Cartridge delivers high efficiency and consistent filtration of fluids in a wide range of critical applications. They are constructed of pleated melt blown filter media that provides removal of particles from 0.1 to 50µm. The high surface area ensures long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in critical process application. All the cartridges are manufactured and assembled in a clean room environment to minimize the possibility of contamination. Series cartridges are available in a while range of configurations to fit most commercially available filter housings.
 
Features
● Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases.
● Pleated design increased the filtration area.
● low pressure drop, long service life
● Full range of removal ratings
● Graded pore density for high dirt holding capacity
● FDA compliance material

Technical Specifications
»  Sizes 10”, 20”,30”40” Long
»  Micron Rating  0.1µm, 0.22µm, 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm, , 50µm
»  Filtration Area More Than 0.7 m2 Per 10” cartridge
»  Outer Diameter 2.7” (69mm)
»  Inner Diameter 28 mm
Maximum operating temperature 80℃@1Bar, support adaptors are recommended for temperature exceeds 50℃
Maximum operating pressure 4.0Bar ,normal temperature
Maximum operating pressure (Reverse Direction) 2.0Bar normal temperature
Maximum temperature sterilization 5times, 20 Minute cycles at 120℃
When filter the air pressure is 2 bar ,start pressure 100Mbar ,10"filter can flow 300NM³/h

Construction
»  Filter media Pleated depth Polypropylene(PP)
»  Support / Drainage Polypropylene(PP)
»  End cap Polypropylene(PP)
»  O-ring seal Silicone, EPDM, NBR, Viton, Teflon, E-FKM

Applications

»  Prefiltration of RO,Pretreatment of sea water desalination
»  Condensate water filtration,hot water recovery in power generation
»  API, solvents,and water filtration in BioPharm market
»  The filtration of bottled water, high Fructose,edible oil,soft drinks,and milk
»  Paints and coatings,Petrochemical,Refineries
»  Microelectronics,film,fiber and resin
»  Aviation Turbine Fuel, High sulfur diesel fuel ( HSD) etc.