Scaffolding pedal mesh through galvanized, PVC heat shrinkable powder jinsu protection of welded mesh or piece of mesh, after plastic coated low carbon steel wire welding, also can separate electroplating, hot dip and plastic coated, has a long the characteristics of corrosion resistance, resistance to ultraviolet radiation. Using the 2.5 x 28 mm galvanized masonry nail ( 20 galvanized sheet, galvanized sheet should be fixed before punching standby) is fixed, the fixed in cast-in-situ concrete (beams, walls, columns, etc.) must be added on the plastic tube expanding; Cast-in-situ concrete, must be in accordance with the provisions, spacing, drilling in advance shall not hammer drilling. Wire mesh to hang a general provisions: in fixed ShiGang screen should be equally Shared between tight. Fixed wire mesh edges, masonry nail should be arranged in 2 ~ 3 cm away from the wire mesh edges, so that pressure wire mesh, don't make the edge of the warp. Steel wire mesh and plaster lap at the grass-roots level shall not be less than 100 mm, overlapping between the wire mesh also shall not be less than 100 mm. Masonry nail spacing should not be greater than 300 mm. And metal foot network composed of square wire stem form without welding diamond hole nodes undulate metal mesh surface has the very good prevent slippery effect